Accessories

It is recommended to use only one type of filament in a single nozzle. Switching between multiple filaments in one nozzle may cause nozzle blockage. It is expected to arrive in 1-2 months. If you need it urgently, please go to the global site...

Overview:The camera is a low frame rate camera that enables remote live broadcast and time-lapse shooting. Working Temperature:  -20°C to 70°C Resolution Ratio: 1920*1080 Maximum Image Transfer Rate: 1-30fps EFL: 2.3mm FOV: 130°±15°  F/No: 2.0 It is expected to arrive in 1-2 months. If...

Overview：The Hotend Cooling Fan cools the hotend to avoid premature filament softening and clogs. It is expected to arrive in 1-2 months. If you need it urgently, please go to the global site to purchase.

Overview:This cable is used to connect the printhead and the printer. It is expected to arrive in 1-2 months. If you need it urgently, please go to the global site to purchase.

Overview：The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.5mm, and its outer diameter is 4mm. Please note that the PTFE tubes are consumables and are at risk of wear, as they may rub against the...

Overview：The QIDI BOX signal line connects the printer and the QIDI BOX Hub for signal transmission between devices. It is expected to arrive in 1-2 months. If you need it urgently, please go to the global site to purchase.

Overview:4.3-inch IPS capacitive touchscreen which connects to the Mainboard which is used to control the printer through the touchscreen interface. It is expected to arrive in 1-2 months. If you need it urgently, please go to the global site to purchase.

Overview:The Q2 Auxiliary Fan is a 4-Pin PWM Fan with RPM Feedback installed on the left side of the chamber, providing better cooling conditions for high-speed printing. It is expected to arrive in 1-2 months. If you need it urgently, please go to the...

Overview:Q2 Cutter Blade is used to cut the filament when replacing the filament or switching between multiple colors. It is expected to arrive in 1-2 months. If you need it urgently, please go to the global site to purchase.

Overview：Desiccant absorbs moisture and keeps the air inside the QIDI BOX dry. Note: Remove the desiccant from the outer sealed transparent plastic bag and then put it in the QIDI BOX to retain the inner packaging to prevent the desiccant from spreading.

Overview：QIDI BOX Active Support Shaft Assembly is a roller for supporting the filament spool and also for actively driving the spool to roll. In the Box：- QIDI BOX Active Support Shaft Assembly *2

Overview:QIDI BOX Driven Support Shaft Assembly is a roller for supporting the filament spool. In the BoxQIDI BOX Driven Support Shaft Assembly *2

Overview:The temperature and humidity sensor monitors and transmits the QIDI BOX environmental temperature and humidity parameters in real time, providing basic data support for the printing process.In the Box: Temperature and Humidity Sensor *1

Overview: The QIDI BOX Selector is used to monitor filament status in real time and automatically detect issues such as tangles. It integrates tubes from multiple QIDI BOX units into a single output, ensuring a continuous and stable filament supply to the printer, and...

Overview:The 8P-4P signal line connects the printer and the QIDI BOX for signal transmission between devices. It is expected to arrive in 1-2 months. If you need it urgently, please go to the global site to purchase.

Overview: The QIDI BOX Selector is used to monitor filament status in real time and automatically detect issues such as clogs and tangles. It integrates tubes from multiple QIDI BOX units into a single output, ensuring a continuous and stable filament supply to the...

Product Name: 3510 Fan Fan Type: Hydraulic bearing Size: 35x35x10MM Voltage：24V Cable Length: 1M Terminal： ph2.0 Turn：6000 rpm Compatible With: H2 V2S Extruder

Product Description: Experience high-speed printing with this ultra-lightweight extruder housing, precision-crafted from aerospace-grade AI6061T6 aluminum. Featuring a hollowed, heat-dissipating design and a durable anodized finish, it’s built for stylish functionality and seamless compatibility with Bambu Lab P1/X1 Printers, offering an effortless upgrade for smoother,...

✨ 𝐊𝐞𝐲 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬✅ Accurately measure the Transmission Distance (TD) of any filament✅ Instantly capture the hex color code for precise digital use✅ Seamless HueForge integration — with ±7.5% TD accuracy for true-to-life rendering✅ USB-C powered for universal compatibility✅ OLED display provides real-time feedback and...