![[MOQ: 6KG] HS_PLA(High Speed PLA) 3D Printer Filament 1KG](http://3djakeus.com/cdn/shop/files/HIGHSPEEDPLA_533x.jpg?v=1762016241)
![[MOQ: 6KG] HS_PLA(High Speed PLA) 3D Printer Filament 1KG](http://3djakeus.com/cdn/shop/files/highspeedplarandomcolor_643648b9-934e-4f20-ac27-f22f5ce52565_533x.jpg?v=1762016240)
![[Best Gift Choices] PLA, PLA Meta, SILK 3D Printer Filament 250G](http://3djakeus.com/cdn/shop/files/250G_533x.jpg?v=1762016361)
![[Best Gift Choices] PLA, PLA Meta, SILK 3D Printer Filament 250G](http://3djakeus.com/cdn/shop/files/sunlu-025kg-pla-silk-175mm-3d-filament-025kg055lbs-986103_533x.jpg?v=1762016361)
-
Vendor:Biqu Equipment
BIGTREETECH Octopus V1.1 Control Board for Voron 2.4
Features: 🐙【Optional Main Control Chip】Uses 32-bit ARM Cortex-M4 series STM32F446ZET6 or STM32F407ZE main control chip. The two chips support Marlin and Klipper with high frequency. 🐙【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to...- From $42.68
$69.88- From $42.68
- (-39%)
- Unit price
- per
Save $27.20 -
Vendor:Biqu Equipment
BIGTREETECH TMC5160T Pro V1.0 Stepper Motor Driver
Key Features: TMC5160T Pro is the upgraded version of TMC5160 Pro, it could support high-voltage printing. External power MOS tube, for higher current Ultra-silent mode Less motor jittering Less pulse loss Drive 57 stepper motor Note: The TMC5160 Pro has been discontinued, and TMC5160T...- From $17.99
$25.64- From $17.99
- (-33%)
- Unit price
- per
Save $7.65 -
Vendor:Biqu Equipment
BIQU H2 V2.0 Extruder For B1 BX Ender 3/ 3 V2/5/6 CR6/10
Important Note: The H2 V2.0 has been discontinued, and the new version H2 V2S has come out.Purchase link👇BIQU H2 V2S Extruder For B1 BX Ender 3/ 3 V2/5/6 CR6/10 Product Description Upgrated stainless steel gear Upgraded stainless steel gears with high precision and wear...- From $4.62
$4.62- From $4.62
- (-40%)
- Unit price
- per
Save $0.00 -
Vendor:Biqu Equipment
BIGTREETECH SKR MINI E3 V3.0 32 Bit Control Board for Ender 3/Ender 3 Pro/Ender 5/Ender 5 plus/CR-10
- From $3.79
$3.79- From $3.79
- (-39%)
- Unit price
- per
Save $0.00 -
Vendor:Biqu Equipment
BIGTREETECH BTT Octopus Pro V1.0/V1.1 For 3D Printer
BIGTREETECH Octopus Pro V1.0 Control Board/ Mainboard Firmware link: Click here 【Main Control Chip】The main control board uses 32-bit ARM-level Cortex-M4 series STM32H723ZE/ STM32F446ZE chip with a frequency of up to 168MHz and the flash is 1MB. 【Support 60V Input】Supports up to 8 3D...- From $45.86
$69.99- From $45.86
- (-34%)
- Unit price
- per
Save $24.13 -
Vendor:Biqu Equipment
BTT SKR Pico V1.0 Control Board Compatible with Raspberry Pi or BTT Pi for Voron V0
Product Description: BTT SKR Pico V1.0 is a customized motherboard designed for the VORON V0 printer, which was launched by the 3D printing team of Shenzhen Big Tree Technology Co., Ltd. Key Features: Brand-new Version for Voron V0& V0.1. Featured with Raspberry Pi ARM Cortex-...- From $26.58
$55.68- From $26.58
- (-52%)
- Unit price
- per
Save $29.10 -
Vendor:Biqu Equipment
BIQU H2O Extruder / Water Cooling Kit for 3D Printer
- From $19.99
$35.98- From $19.99
- (-44%)
- Unit price
- per
Save $15.99 -
Vendor:Biqu Equipment
BIGTREETECH PI TFT43 / TFT50 / TFT70 V2.1 Touch Screen for Raspberry Pi/Pi 2
Please note: Pi TFT screens are specially designed for Raspberry Pi, which has a DSI port to connect to Raspberry Pi, and it is also compatible with Bigtreetech Pi 2.- From $36.91
$55.68- From $36.91
- (-36%)
- Unit price
- per
Save $18.77 -
Vendor:Biqu Equipment
1M ID 2mm OD 4mm Teflon PTFE Bawden Pipe +2/3pcs Quick Fit Couping 1.75mm Filament for E3D V5 E3D V6 J-head
Model Number: E3D V6Type: OtherProduct code: KIT018usage: For 3D printer partCondition: New 100%Stock: In stockPlace of region: Guangdong,China(Mainland) Packing List 1:Tube Teflon 2*4 1.75mm *1V6 connector PC4-01 *2Packing List 2：Tube Teflon 2*4 1.75mm *1(HSP)KJ 04-M6 MM gold connector *2V6 connector PC4-01 *1- From $3.35
$4.50- From $3.35
- (-26%)
- Unit price
- per
Save $1.15 -
Vendor:Biqu Equipment
BIGTREETECH SKR MINI E3 V1.2 32 Bit Control Board +TFT35 E3 V3.0 for Ender 3
- $55.99
$96.51- $55.99
- (-42%)
- Unit price
- per
Save $40.52 -
-
Vendor:Biqu Equipment
BIQU RGBDuino UNO V1.2 Jenny Greek Duck ATMEGA328P-AU Chip 16MHZ 5V Development Board VS Arduino UNO R3 Upgrade for Raspberry Pi 4 Raspberry Pi 3B
- From $7.30
$10.86- From $7.30
- (-33%)
- Unit price
- per
Save $3.56-
GEEK Duck
-
Jenny
-
RGB Base(for Duion Board)
-
RGB Keyboard(for Duion Board)
-
Vendor:Biqu Equipment
BIQU PIXEL L 9.1 inch 4K Photocuring LCD 3D Printer
- From $749.00
$899.00- From $749.00
- (-17%)
- Unit price
- per
Save $150.00 -
Vendor:Biqu Equipment
BIGTREETECH ADXL345/S2DW Accelerometer Board for Running Klipper
Product Introduction S2DW V1.0.1/ADXL345 V2.0.1 is a module for 3d printer resonance compensation. It can communicate through USB, greatly simplifying wiring. Please note: The chip version is the only difference between ADXL V2.0.1 and S2DW. The S2DW V1.0.1 features the LIS2DW12TR, offering the same...- From $9.99
$18.45- From $9.99
- (-46%)
- Unit price
- per
Save $8.46 -
Vendor:Biqu Equipment
BIGTREETECH EBB 36/42 Can Bus & Gen2 for Connecting Klipper Expansion Device Support PT1000
EBB 36/42 Can Bus Product Introduction: BIGTREETECH EBB36 or EBB42 CAN is a nozzle adapter board specially designed for a 36 or 42 stepper motor extruder, which is launched by the 3D printing team Shenzhen Big Tree Technology Co., Ltd. It can communicate...- From $13.59
$25.99- From $13.59
- (-59%)
- Unit price
- per
Save $12.40 -
Vendor:Biqu Equipment
BIGTREETECH Piggyback36 Tool Board for 36/42 stepper motors
- $12.98
$13.68- $12.98
- (-5%)
- Unit price
- per
Save $0.70 -
Vendor:Biqu Equipment
EZ Drive Easy Driver EZ2209 EZ2208 EZ5160 Pro EZ2130 EZ6609 EZ2225 EZ2226 for SKR 3 EZ Control Board
- From $4.98
$8.67- From $4.98
- (-77%)
- Unit price
- per
Save $3.69 -
Vendor:Biqu Equipment
BIGTREETECH BTT SKR 3 EZ Control Board Mainboard for 3D printer
Product Introduction BIGTREETECH SKR 3 EZ V1.0 motherboard is a 32-bit 3D printer motherboard updated by the team of Shenzhen Biqu Technology Co., Ltd. for our EZ series drivers on the basis of SKR 3. It is compatible with both the EZ series driver...- From $7.28
$11.88- From $7.28
- (-39%)
- Unit price
- per
Save $4.60 -
Vendor:Biqu Equipment
BIGTREETECH BTT SKR 3 Control Board for 3D printer
Note: 1. [ EZ-Driver Connector ] is required if you use EZ driver (like EZ2209 / EZ5160 Pro) for SKR 3 control board. 2. The chip has been updated to H723, which has a faster refresh rate (up to 550MHZ).- From $4.98
$7.24- From $4.98
- (-37%)
- Unit price
- per
Save $2.26 -
Vendor:Biqu Equipment
Copper Wire Brush 3D Printer Cleaner Tool Brush Handle 3D Printer Cleaning Heater Block V6 Nozzle Hot Bed 3D Printer Parts
Features: 1. For cleaning and light scrubbing. 2. Suitable for cleaning operations and removing flaking paint, rust and dirt. 3. Mostly used for families, degrees and workshops. 4. Arrive at the head of the position. 5. Comfortable and soft...- From $1.52
- From $1.52
- (-0%)
- Unit price
- per
-
Golden
Customer Service 091 234-ELLA
Free shipping on All Orders. No Minimum Purchase
SUNLU S2 Filament Dryer, 360° Surround Heating During 3D Printing
【Keep Filaments Strong & Flexible】By Using SUNLU Filament Dryer Box S2 to removing moisture from the filament before it's used in the 3D printer, S2 filament dryer helps to ensure that the filament will be dryed. which will result in better print quality and...
- From $44.99
$79.99- From $44.99
- (-44%)
- Unit price
- per
Save $35.00
-
S2(Black) *1 Set
-
S2(Black) *2 Set
-
S2(Black) 1 Set + Random PLA 1KG*3
-
S2(White) *1 Set
[Best Gift Choices] PLA, PLA Meta, SILK 3D Printer Filament 250G
Model: PLA filament 1.75mm
Diameter Format: 1.75mmPrint Temp.: 205-215℃Tolerance: ±0.02mmPrint Speed: 50-100mm/sPlatform Temp: Depends on the platform: No need or 50-65℃N.W.: 0.25kgTensile Strength: 6-11kgfMelt Flow Rate: 7-9g/10min(200℃,2.16kg)Certificate: RoHS, Reach
- $4.99
$8.99- $4.99
- (-44%)
- Unit price
- per
Save $4.00
-
PLA Black
-
PLA White
-
PLA Grey
-
PLA Red
Nylon-Like Resin 1000G
Nylon like, PA-like Features 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is better, can punch and tap.3. The molding performance is similar to THAT of PA, which is applied to product models requiring high hardness and...
- From $19.99
$49.88- From $19.99
- (-60%)
- Unit price
- per
Save $29.89
-
Black 1KG
-
Gray 1KG
-
Dark Gray 1KG
-
White 1KG (Flash Sale)
- Choosing a selection results in a full page refresh.