![[MOQ: 6KG] HS_PLA(High Speed PLA) 3D Printer Filament 1KG](http://3djakeus.com/cdn/shop/files/HIGHSPEEDPLA_533x.jpg?v=1762016241)
![[MOQ: 6KG] HS_PLA(High Speed PLA) 3D Printer Filament 1KG](http://3djakeus.com/cdn/shop/files/highspeedplarandomcolor_643648b9-934e-4f20-ac27-f22f5ce52565_533x.jpg?v=1762016240)
![[Best Gift Choices] PLA, PLA Meta, SILK 3D Printer Filament 250G](http://3djakeus.com/cdn/shop/files/250G_533x.jpg?v=1762016361)
![[Best Gift Choices] PLA, PLA Meta, SILK 3D Printer Filament 250G](http://3djakeus.com/cdn/shop/files/sunlu-025kg-pla-silk-175mm-3d-filament-025kg055lbs-986103_533x.jpg?v=1762016361)
-
Vendor:Biqu Equipment
Heating block, oval aluminum AL6061(compatible with H2 V1.0)
- $8.00
- $8.00
- (-0%)
- Unit price
- per
-
Vendor:Biqu Equipment
3PCS/Lots BIQU TL-Smoother V1.0 Filter Module Expansion Board For 3D Printer Driver
Brand Name: BIQUModel Number: ZMK000003Name: TL-SmootherFit to: 3D PrinterPlace of origin: ChinaSize : 40*30Type: Voltage Regulator The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the...- From $8.50
$10.50- From $8.50
- (-29%)
- Unit price
- per
Save $2.00 -
Vendor:Biqu Equipment
BIQU BX 3D Printer FDM 3D printer replaceable boards and screen kits
Note: The screen and motherboard of the BX printer need to use the same version.- From $7.90
$12.50- From $7.90
- (-43%)
- Unit price
- per
Save $4.60 -
Vendor:Biqu Equipment
CR10 Extruder Bowden Extruder Capricorn PTFE Tube 1.75mm Filament 3D Printer Parts For CREALITY CR10 CR Ender 3 upgrade Printer
- From $8.99
$35.96- From $8.99
- (-45%)
- Unit price
- per
Save $26.97 -
Vendor:Biqu Equipment
BIGTREETECH TMC5160T/TMC5160T Plus Stepper Motor Driver SPI Mode
Key Features: TMC5160T Plus is a high-power stepper motor driver control module, featuring 8 high-power MOSFETs separately mounted on the board with a maximum voltage of 60V. This supports a wider range of stepper motors and offers greater adaptability. 8 high-power MOSFETs separately mounted...- From $15.99
$14.99- From $15.99
- (-26%)
- Unit price
- per
Save $-1.00 -
Vendor:Biqu Equipment
BIQU B1 SE PLUS IDEX Upgrade Kit
- $130.40
$142.63- $130.40
- (-9%)
- Unit price
- per
Save $12.23 -
Vendor:Biqu Equipment
BIGTREETECH Manta M4P/M8P/M5P Control Board running Klipper with CB1/CB2/CM4
Product Description An Innovative and Easier Way to Run Your Klipper Manta M4P/M5P/M8P are born for Klipper running, they allow a direct installation of the BIGTREETECH CB1/Raspberry Pi CM4 to run the Linux system, then the Klipper. Board-to-Board Connector Designed with the same connector...- From $5.90
$32.69- From $5.90
- (-37%)
- Unit price
- per
Save $26.79 -
Vendor:Biqu Equipment
BIGTREETECH PI4B Adapter V1.0 for CM4 or CB1
Note: 1. The CB1 couldn't be connected to the PI TFT screen. The DSI/CSI port will only work while using CM4.2. The PI4B should be used with CB1, CB1 eMMC or CM4 core board to run Klipper. CB1 & CB1 eMMC Comparision Chart 👉About the...- From $5.90
$25.68- From $5.90
- (-42%)
- Unit price
- per
Save $19.78 -
Vendor:Biqu Equipment
2PCS BIQU Heating tube 6*20mm 12V 24V 50W Ceramic Cartridge Heater 1M 2M Reprap&Mendel For V6 J-head Extruder
Model Number: Ceramic Cartridge HeaterBrand Name: BIQUProduct Name: Ceramic Cartridge HeaterSize : 6*20mmLength of cable: 1M &2MDiameter: 6mm Packing List: 2pcs Ceramic Cartridge Heater Features 1. The effective heating part of the heater must keep dry. 2. The electrical...- From $4.88
- From $4.88
- (-0%)
- Unit price
- per
-
Vendor:Biqu Equipment
1M 2*4mm PTFE Tube Teflon PiPe to J-head hotend RepRap Rostock Bowden Extruder for 1.75/3.0mm For V5
Place of Origin: Guangdong, China (Mainland)Lead Time: In stockCondition: New100%Type : Voltage RegulatorUsage: 3D Printer partsColor: White / Transparent / BlueSize: 2x3mm/ 2x4mm/ 3x4mm/ 3x5mm/ 4x6mmDiameter: 1.75/3.0mm Packaging Details Unit Type: lot (20 pieces/lot) Package Weight: 0.4kg (0.88lb.) Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in...- From $2.51
- From $2.51
- (-0%)
- Unit price
- per
-
Vendor:Biqu Equipment
BIGTREETECH MINI E3 Connecting cable for Ender 3 V2 Display Screen
Length: 19.68 inch- $5.99
$9.50- $5.99
- (-37%)
- Unit price
- per
Save $3.51 -
Vendor:Biqu Equipment
BIQU B1 SE FDM 3D Printer HD Color Screen Full Metal Extruder Upgrade 32Bit Control Board with Auto-Leveling Function Printer
- $319.00
- $319.00
- (-0%)
- Unit price
- per
-
Vendor:Biqu Equipment
BIQU H2 V2S REVO Extruder
Product Description H2 V2S REVO Easy Nozzle Swaps with Fingers, joint research and development with E3D. 198g lightweight Support 300℃ Dual gear 7:1 Labor-saving level Revo Brass Nozzle Change nozzles at room temperature using just your fingers. No complex tools, no hot tightening. Moreover,...- From $14.99
$25.29- From $14.99
- (-44%)
- Unit price
- per
Save $10.30 -
Vendor:Biqu Equipment
BIQU H2 V2S Lite Extruder
Product Description Lighter and Better Heat Dissipation Featuring a hollow-out design with a visible inner structure, H2 V2S Lite weighs only 175g, which contributes to less inertia and more accurate positioning. Rapid Cooling At the same time, the airflow is also improved to give...- From $6.88
$35.98- From $6.88
- (-57%)
- Unit price
- per
Save $29.10 -
Vendor:Biqu Equipment
LDO-36STH20-1004AHG(XH) Motor for Voron 0.1 & Voron Stealthburner
- $18.30
- $18.30
- (-0%)
- Unit price
- per
-
Vendor:Biqu Equipment
LDO-42STH48-2504AC RevA 1.8° 48MM Nema 17 Motor for Voron 2.4
- $19.59
$29.99- $19.59
- (-35%)
- Unit price
- per
Save $10.40 -
Vendor:Biqu Equipment
LDO-42STH48-2504MAC(F) RevA 0.9° 48MM Nema 17 Motor
- $19.35
- $19.35
- (-0%)
- Unit price
- per
-
Vendor:Biqu Equipment
2/Lots 3D printer accessory for Reprap Bowden Extruder Connector One-touch fittings 4*2 mm M6 threaded for 1.75 mm filament
Brand Name: BIQUProduct Name: (HSP)KJ 04-M6 MM Brass ConnectorPTFE Tubing OD: 4mmThread: 3mmHeight: 18.5mmMaterial: Copper- From $2.34
$4.68- From $2.34
- (-75%)
- Unit price
- per
Save $2.34 -
Vendor:Biqu Equipment
3/5/10PCS Spring For 3D Printer Parts Imported Heated Bed MK3 CR10 Adjustment Length 25MM OD 8MM ID 4MM Hotbed
- From $0.66
- From $0.66
- (-0%)
- Unit price
- per
-
Blue
-
Yellow
-
Vendor:Biqu Equipment
3D Printer Parts V5 Heater Block Hotend Silicone Sock V5 J-head For Anycubic I3 Mega Hotend 12V 24V Mega-S Extruder Thermistor
- From $1.68
- From $1.68
- (-0%)
- Unit price
- per
-
Heater Block
-
Silicone Sock
-
Heater Block & Silicone Sock
Customer Service 091 234-ELLA
Free shipping on All Orders. No Minimum Purchase
SUNLU S2 Filament Dryer, 360° Surround Heating During 3D Printing
【Keep Filaments Strong & Flexible】By Using SUNLU Filament Dryer Box S2 to removing moisture from the filament before it's used in the 3D printer, S2 filament dryer helps to ensure that the filament will be dryed. which will result in better print quality and...
- From $44.99
$79.99- From $44.99
- (-44%)
- Unit price
- per
Save $35.00
-
S2(Black) *1 Set
-
S2(Black) *2 Set
-
S2(Black) 1 Set + Random PLA 1KG*3
-
S2(White) *1 Set
[Best Gift Choices] PLA, PLA Meta, SILK 3D Printer Filament 250G
Model: PLA filament 1.75mm
Diameter Format: 1.75mmPrint Temp.: 205-215℃Tolerance: ±0.02mmPrint Speed: 50-100mm/sPlatform Temp: Depends on the platform: No need or 50-65℃N.W.: 0.25kgTensile Strength: 6-11kgfMelt Flow Rate: 7-9g/10min(200℃,2.16kg)Certificate: RoHS, Reach
- $4.99
$8.99- $4.99
- (-44%)
- Unit price
- per
Save $4.00
-
PLA Black
-
PLA White
-
PLA Grey
-
PLA Red
Nylon-Like Resin 1000G
Nylon like, PA-like Features 1. Good molding, low odor, low shrinkage;2. All aspects of tensile, bending and toughness performance is better, can punch and tap.3. The molding performance is similar to THAT of PA, which is applied to product models requiring high hardness and...
- From $19.99
$49.88- From $19.99
- (-60%)
- Unit price
- per
Save $29.89
-
Black 1KG
-
Gray 1KG
-
Dark Gray 1KG
-
White 1KG (Flash Sale)
- Choosing a selection results in a full page refresh.